Skip to content

2K1 Catera OMEGA TRS FX-R BiXenon//DL50//DDM-55W//R8 LED

2K1 CCS (Euro Conversion) FX-R Projectors TRS DL50 Philips Bulbs 55W (can be boosted to 75W) Output ~5500lm/bulb OEM Bulbs ~3200lm/bulb DDM 50W Ballasts R8 LED Lighting Sylvania Silverstar High Beam 55W H7 Projector mods include shield spacing, and bulb spacing
Video Rating: 4 / 5

Comments 18

  1. hardtocreate wrote:

    will these fit in the fx-rs just like the d2s bulbs do? or do u need some mods?

    Posted 16 Jul 2012 at 6:41 am
  2. Malloki100 wrote:

    It’s Good lens .

    Posted 16 Jul 2012 at 7:23 am
  3. advtactics01 wrote:

    Post a vid when and if you can!
    i just talked to TRS and they recommended a D2S bulb that works off 35w but puts out as much light as a 55w. Though it still had a little of the yellow (halogen) look around the outside edges i didnt want to down grade or revert back to that look.

    Posted 16 Jul 2012 at 7:41 am
  4. CateraMV6 wrote:

    No idea… it was in my playlist.

    Posted 16 Jul 2012 at 8:11 am
  5. CateraMV6 wrote:

    Yes they did, burned out within days of installing them so I never bothered to replace them.

    Posted 16 Jul 2012 at 9:01 am
  6. CateraMV6 wrote:

    Agree, my foreground is probably about 30ft from the front bumper.

    Posted 16 Jul 2012 at 9:31 am
  7. CateraMV6 wrote:

    No, not exactly I have a foreground limiter so most of the increased light output is sent to the sides, so its a very even lighting side to side, and gets brighter as you go near the cutoff

    Posted 16 Jul 2012 at 10:09 am
  8. CateraMV6 wrote:

    Sounds promising… the alignment of all of those will be difficult but if you spend the time it will turn out great.

    Posted 16 Jul 2012 at 10:23 am
  9. CateraMV6 wrote:

    Not yet, I am doing some indoor tests with the 75W system to ensure that the temperatures stay consistent, I dont want to risk blowing up my bowls.

    I will update the video as soon as I get the system installed.

    Posted 16 Jul 2012 at 10:34 am
  10. CateraMV6 wrote:

    My system is highly modified, and on High beam the car runs the OEM halogen projectors combined with the Bixenon of the FXR. The 55W system makes a difference as well.

    Posted 16 Jul 2012 at 11:04 am
  11. CateraMV6 wrote:

    True, my system is nowhere near stock, it has upgraded projector which takes some light from the high beam to send it forward. The DL50 set up with 55W ballasts and upgraded wire harness helped a lot too. In stock form it was not nearly as impressive.

    Posted 16 Jul 2012 at 11:49 am
  12. advtactics01 wrote:

    Have you boosted to 75w ?!?!?!?  is it just the ballast and the bulb thats required to go 50w or even 75w ???

    Posted 16 Jul 2012 at 12:23 pm
  13. CateraMV6 wrote:

    Thats true but bulb spacing brought it closer to the bumper just below the hood line as seen from the driver seat… the as purchased configuration you could see the foreground near the hood line…

    Posted 16 Jul 2012 at 12:29 pm
  14. CateraMV6 wrote:

    Well it could be that the camera shot it brighter then it is but it truly is bright, its running 55W DL50s and projector has a few mods too. not a straight up 35W installation.

    Posted 16 Jul 2012 at 1:13 pm
  15. advtactics01 wrote:

    I dont know what you did…but i just finished my fx-r projector retro and they are NOWHERE near the same brightness here. Be forwarned future retrofitters.

    Posted 16 Jul 2012 at 1:48 pm
  16. noodi5555 wrote:

    what an awesome light beam :-) , I will do six projectors retrofit to my truck. 2 fx-r with 50w balast and 4 mini h1 with 35w . l will light the the city like nothing before.

    Posted 16 Jul 2012 at 2:28 pm
  17. livingonmyon wrote:

    so dude what are the problems you got now? or is everything going ok?

    I’m trying to get a FX-R for my marquise but I’m kinda hesitant cuz the marquise isn’t an easy car when it comes to electricity…

    Please I need your Feedback! :)

    Posted 16 Jul 2012 at 3:14 pm
  18. CateraMV6 wrote:

    Either one will work for sure..

    Posted 16 Jul 2012 at 4:00 pm